FOs: House Stark Fingerless Mitts and Fifth Doctor Socks!

It's still not Friday (but it's kinda close) and these have been finished for two weeks now, but better late than never, right.

In my post about my resolutions for March, I alluded to these finished objects, so I should probably show them to you. Plus they're pretty awesome.

First: T.A.R.D.I.Socks by Anna Richardson (round 2)

It's really hard to photograph your own feet.

So... I mentioned above that this is round 2 of these particular socks. I also mentioned in my resolutions post that these socks resulted in a net gain of yarn. Here's the story.

You can first start here with the story of how I decided to knit myself knee-high socks for my Fifth Doctor (Doctor Who) costume even though I had never knit a single sock before in my life and previously had no desire to do so. So I knit myself knee high socks out of a cotton/bamboo/spandex blend yarn (because the costume was originally for summer) following a pattern that's lovely and beautifully charted, but presumes you've actually done some moderate amount of sock knitting and are using wool and know how to adjust socks to fit your feet. Needless to say, I was setting myself up for failure before I even started. So I knit them over the course of 6-weeks desperately trying to finish them in time for the convention I needed my costume for (the only time in my life I've ever knit more than one thing at a time. I will never do it again.), and I was pretty proud of myself. For one thing, I've heard many people who attempted these socks either don't finish or take forever to finish since there's a lot of purling and cabling and charting and they're REALLY LONG, so I was pretty impressed that I not only managed to make socks that look like socks, but that they were also socks that experienced sock knitters don't even finish. So I put them on for the convention and they were HUGE. Four inches too long, too big in the gusset, bunchy in my shoes and didn't stay up if I took more than 10 steps. So...they were socks, but they weren't socks that fit.

Fast forward to now. I needed to re-wear the costume for a Doctor Who panel at a convention in April, and I knew I needed to re-make the socks. I'd been trying to knit my way through the basic sock patterns in Wendy Johnson's Socks from the Toe Up book so that I could have some knowledge of how to make socks fit my feet, and I'd also knit the (still don't fit) butterfly knee-highs to try to figure out the calf sizing. Armed with this knowledge, I ripped out the socks (3.5 balls of RIDICULOUSLY SPLITTY YARN), re-wound, and started again with a modified pattern. I dropped a needle size so I didn't have to modify the width, but I took out a portion of the chart and recalculated the row count so I could shorten the socks and still keep the calf shaping. I managed to use about 55 fewer yards (50 fewer meters)/15 fewer grams of yarn this time, which is where the net gain came in. But the socks are the right height and fit better around my calf (though still not perfect, but I devised a solution with a ribbon that holds them up just fine) and I'm much happier with them. They are a bit of a slog though, so I can definitely see how people who don't need them for a specific purpose on a deadline would get tired of doing it. The only reason I made it through without quitting was that I knew I needed them for the costume.

In addition, this yarn is terrible. I won't mention what it is here (although you can see it if you look on my project page), but I don't think I'll ever knit with it again. I chose it because I wanted lighter weight and hopefully cooler socks to wear with the costume in the summer, but the cotton and bamboo don't have the memory to hold the socks up and the spandex makes the yarn INCREDIBLY splitty, making it very difficult to work with, especially when you're knitting and purling and cabling with yarnovers. I'm not impressed and it definitely wasn't fun to knit it twice.


Second: Game of Thrones House Stark Fingerless Mitts

These are for the Game of Thrones swap package I put together (which I'll tell you about as soon as a package actually arrives for me and I can do a sent/received post like I did for the Downton Abbey swap). These are my own design, modified from a very basic fingerless mitts pattern. I've done the same sigil on a hat and on an eReader case, so it was just a matter of modifying the stitch count and re-charting it. The grey main colour is Knit Picks Palette in Ash and the sigil colour is Knit Picks Imagination Hand-Painted in the Castle Walls colourway, which screamed Winterfell to me from the moment I saw it.

These were super quick and easy to knit up and my recipient loved them. I'm not really into fingerless mitts (I find them hugely impractical) but I'm thinking about modifying the other designs I have (Targaryen, Lannister, and Night's Watch) into the fingerless mitts too. Someday I'll write up the patterns for actual. I started writing up the hat pattern, but I never finished it. These are super fun and a great way to show your support for various houses. If you're interested, I sometimes list the hats (and may eventually list the eReaders and the fingerless mitts) on my Etsy page. Let me know.

FO(s): High Tea Cuffs and Jabot

Hi all,

I have one totally finished object today (blocked and the ends woven in) and one that is completed, but hasn't been blocked or had the ends woven in, so I figured I'd talk about them together. They are a set, after all.

If you've been following along, you know I've been working on the High Tea Cuffs and Jabot by Andrea Jurgrau from the Unofficial Downton Abbey Knits 2013 for my swap partner for the Subway Knits Downton Abbey swap. Well...they are done. 

The jabot was easy and basically took the lace motif from the knits, applied a second panel of the lace motif that you attached over the top, then knit the scarf in the twisted ribbing for a desired length, then repeated the lace motif. It's a nice construction and very straightforward. Again, I was using the Knit Picks Imagination Hand-Painted Sock Yarn in the Ruby Slippers colourway, and I am no less enamoured with it than I was at the start. It's beautiful yarn and has a really nice hand and just the littlest bit of the alpaca halo. The hand-painting is gorgeous and I think it made a really beautiful end product.

The cuffs were also easy, but because the Imagination yarn (never stops being funny) is fingering weight instead of lace weight, it did require me to do a bit of math and chart fudging. I knit both the mitts and the scarf on a size 3 needle instead of the size 1 called for by the pattern, which meant I got the row gauge right, but not the stitch gauge. I thought I'd calculated my gauge right, but apparently I hadn't because the first time I made the mitts they were far too small to fit any adult-sized hand, so I re-knit them. Thankfully they're a very quick knit and once you're out of the lace section it's just 20 or so rows of the twisted stitch ribbing with a few decrease rows and check points and they go pretty fast. So I re-knit them with 3 pattern repeats instead of the 2 I started with and the 4 called for by the pattern, and they are slightly large on my very tiny hands pre-blocking, so I think they will fit just fine. Here's hoping. The scarf is probably skinnier than it's supposed to be because of the gauge things, but it's working out okay for me so I'm going to leave it. It's a scarf, it doesn't exactly have to "fit" a particular size as long as it's long enough.

So, this part of the swap package is done. Still much to do, but it feels good to have the knitting over with. The added bonus of this project is that I can count it toward the Stitch Red KAL that Geknitics and Knotty Knerd at Knerd Girl Knits are running! Hooray for one project serving two purposes! I love it when things come together like that.

WIP Wednesday: High Tea Cuffs

Let me start out here by saying...these are so close to done it hurts! I can almost promise you that pending epic disasters you'll be seeing these again for FO Friday. I know I said that with the sweater and then it didn't happen, but if I can get the few internet things done that I need to do relatively quickly, I may even be able to finish knitting these tonight and get them blocking. Plus they should block much faster than a full worsted weight sweater.

I'm knitting the High Tea Cuffs (and eventually the matching Jabot) for my swap partner in the Subway Knits Downton Abbey swap (shh...don't tell!). The pattern is from the Unofficial Downton Abbey Knits 2013 and actually calls for laceweight (which I do not have and will never have), but I spent the better part of a week and a half swatching and am confident that my new adjusted gauge math works out just fine. I chose to knit them out of the Knit Picks Imagination Hand-Paints in the Ruby Slippers colourway that I had in my stash for a number of reasons. First...I thought the hand-painted nature of the yarn would add interest while still showing off the lace pattern. Second, my swap partner said they like royal colours and I figured Ruby was pretty royal! Third, it's fingering weight, which is a reasonable substitute for a laceweight. Plus the little bit of alpaca in the yarn makes them soft and gives them just a little of the halo. I really like how they're turning out and I hope my swap partner will too.

The only complaint/problem I have so far is that I did the bind-off as instructed in the pattern and it's WAY too tight. If it doesn't fix itself after blocking I'm going to rip it out and re-do the bind off with a stretchier one. I don't want it too stretchy because it should grip the wrist a little bit, but at the same time I can barely get it over my hand and I have tiny little hands/wrists so I figure that's a good sign I should make it bigger.

Stay tuned for more on Friday, I imagine.

Finished Object: VERY EXCITING FINISHED OBJECTS!!!

I just finished the second in a series (currently there are only 3 designs, but that’s just because I haven’t created the 4th one I have planned) of Game of Thrones/Song of Ice and Fire inspired sigil hats!

They look like this!





I completed the Stark hat on Monday (this is the aforementioned hat that I knit on a US5 instead of a US3…it’s comically large and was almost a bit tragic, but I think it's all going to work out) and yesterday I did the final seaming on the Lannister hat. Next up (the yarn came this morning as I was on my way out the door and I didn’t have time to snuggle it) will be a Targaryen hat and then Night’s Watch. Potentially I will also create a Greyjoy hat and maybe Tully or Martell (probably Martell, given the content of the upcoming season of the show). All the hats are created with a base of Knit Picks Palette and the sigils are done in this AMAZING yarn that Knit Picks stopped making (but I snapped up all of it that I could and still look for the sales on Ravelry) called Imagination Hand Painted. It’s a fingering weight and has the most amazing tonality. It’s this yarn that inspired the sigil projects in the first place. I saw what they referred to as the “Castle Walls” colourway and thought to myself that I needed to find a fantasy theme to use it for. The more I thought about it and the “Treasure” colourway, the more I realised they needed to turn into Game of Thrones somethings. This yarn is BEAUTIFUL and the variegations are coming through wonderfully and I am in absolute love and I hope you all like them, too!

I have hopes that they can turn into things besides hats, but for now I want to make a bunch of hats before the premiere of season 4.

I’ll keep you updated on how things are going, and I’ll get them listed on my commissions page as soon as I’m ready to say these are good to go.

WIP: Exciting New Projects

If you read a few of my posts a few weeks ago while I was on hiatus from the sport weight 4th Doctor scarf, you may have heard me allude to a new exciting project.

Well, it’s done enough that I can share it with you!

Inspired by my recent Frostfangs hat, the AMAZING Knit Picks Imagination Hand Painted Fingering Yarn in all manner of colourways with exciting fantasy names (Castle Walls, Ruby Slippers, Treasure), and my supreme love of all things A Song of Ice And Fire, I have created…..

Game of Thrones House Sigil Hats!

I got the pattern drafting done a few weeks ago for the Stark, Lannister, and Targaryen sigils (I plan on making the set of patterns available for purchase as soon as I’ve knitted up a hat for each of them just to make sure the pattern is right), and I was waiting to finish both the Frostfangs Hat and the 4th Doctor scarf before I got started. The background yarn (MC) is Knit Picks Palette since I had such fun working with it in the Frostfangs hat and since I knew the weights and gauge would match up well. Plus, it’s great for colourwork, and even though these are knit in intarsia and not stranded, I thought the Palette would be the best choice just because of colours and yarn weight matching. Plus, you all should know by now how much I love Knit Picks. I began with the Stark hat (since I always begin with the Starks, and since it’s winter, and since I had a skein of Palette in Ash that was just sitting around). The ribbing takes forever, as it did with the Frostfangs hat, but at least I opted not to do the extra 40 rows of stockinette as a liner on this hat. I may need to line it with fleece or something just to keep them warm enough, though for anyone who doesn’t live in the frigid north like myself, these will probably be okay, as the Palette is a 100% wool yarn and the Imagination is mostly wool with a bit of nylon, just like the Chroma. I will evaluate that later. I learned the hard way that I have to work the piece flat and then seam it, since I hear rumours that there are ways to work intarsia in the round, but I am unable to captivate the mystical energies that allow this to work out. I’m working on size 3 circulars with a CO of 180 stitches. I marked of 61 on each side and have the pattern centered with the remaining 58 stitches. The Imagination yarn (that statement never stops being funny to me) I chose for the Stark sigil is the “Castle Walls” colourway. Unfortunately, Knit Picks is clearing out this yarn and all you can get is the "Treasure" colourway at this time. It’s absolutely beautiful and from the moment I saw it I knew it needed to become the direwolf symbol of House Stark.

Over the weekend, I completed the sigil portion of the hat and I wanted to share the photo with you. I think it turned out well, especially for something I drafted myself, and I hope to make some gloves and possibly scarves (though, scarves in Palette will take me about 40 years, so I’ll either have to find some comparable yarns in worsted or sport/DK weight to work with or just not make scarves). I also plan to make these hats for some of the other houses. It’s my hope that I can have several completed in time for the Game of Thrones season 4 premiere coming up at the end of April, but 5 rows of the sigil (10 rows of the straight stockinette) take me about an hour. I’ve completed the ribbing and 51 rows (up to the decrease) thus far, and I’m 15 hours in. It’s not quite shaking out to be the almost 40 hour investment that the Frostfangs hat was, but my confidence that I’ll be able to just knock out 15 - 20 hats in the next month and a half (especially with a lot of RL business going on) is starting to dwindle.

For now, I leave you with some photos of the sigil. I hope you can get a sense of the gorgeousness of the Imagination yarn (still laughing) from these.




Remember, if you want one, or if you think you want to purchase the pattern at a later date, please check my Etsy store, my commissions page, and my Ravelry page in a few months and you should be able to place an order.